Reader & Intercom Posts

Fabricated bollards and posts for mounting card readers, proximity readers, keypads, intercom units and other items of access control. All products supplied on mounting plates have a hole in the base plate to allow wire access if access control is not wireless. Standard products are shown below, but these products can all be manufactured in different heights to suit wheelchair access, pedestrian access, car access and truck access.

MOUNTING : supplied with bolt down mounting plate, as standard. Available with pins for building in to concrete (standard height plus 350mm to build) to special order.

FINISH : mild steel zinc plated ready for powder coating or stainless steel.

 

Z201 : Pedestrian tubular bollard, single height with 45 degree angle at top. Manufactured from 130mm diameter tubular material. Overall height 950mm. Base plate 200 x 5mm diameter with four 10mm holes for bolt fixing.

Z202 : Pedestrian square post, single height with 45 degree angle at top. Manufactured from 152x152mm square section. Overall height 950mm. Base plate 200 x 200 x 5mm with four 10mm holes for bolt fixing.

Z203 : Pedestrian tubular bollard, single height with flat face mount. Manufactured from 130mm diameter material. Overall height 1500mm. Recessed flat 210mm high x 130mm wide for mounting key pads etc. Base plate 200 x 5mm diameter with four 10mm holes for bolt fixing.

Z204 : Car post with goose-neck, single height. Manufactured from 40x40mm square section. Overall height 1100mm. Top plate 220mm high x 120mm wide for mounting key pads etc. Base plate 250 x 250 x 5mm with four 10mm holes for bolt fixing.

—————————————————————————————————————————————————

Take a look at the full product details and catalogue, or phone +44 (0) 1785 282910 for assistance.