Automatic Flush Bolts – Universal

Automatic Flush Bolts - Universal The Z015 (862/962) automatic flush bolt is U.L. listed for use on the inactive leaf of a pair of metal or timber doors, and is tested to over one million cycles. It can also be fitted to composite doors. The units are supplied in pairs, consisting of a bolt for the top of the door and another bolt for the bottom of the door. They are non-handed and it is not necessary to reverse either the top or bottom bolt.

The units are fully automatic and require no power or electricity. They are installed in the top and bottom of the inactive leaf. Closing the active leaf automatically extends the top and bottom bolts 19mm into the headframe and sill strikes, locking the inactive leaf. Opening the active leaf automatically retracts the top and bottom bolts, releasing the inactive leaf.

The patented free floating cams with a swivel face require a maximum of 3lbs closing force. An override feature prevents damage to doors or bolts, should the bolt heads be prevented from entering either the top or bottom strikes. The bolt head rods can be vertically adjusted by 13mm for unusual clearances.

To prepare the door for installation, only two 28.6mm diameter holes are required, one at the top of the door and one in the meeting stile. The top bolt is installed first, and then the edge bolt. The edge bolt’s grooved channel will engage the top bolt’s grooved bottom, mating them together inside the door.

The major advantage on timber doors is that the small profile design eliminates cutting away the corner of the wood door adding stability and reducing the possibility of the veneers from splitting or delaminating.

HANDING : reversible, non handed.

FINISH : standard finish US32D satin stainless steel; other finishes available to special order.

PACKING : packed as a complete set i.e. top bolt and bottom bolt.

KIT : comprises 2 x bolts, 2 x housing faceplates, and all screws.

FIXING : supplied with installation template.

The Z8900-Z universal automatic flush bolt retrofit frame prep kit offers a frame reinforcement plate and two reversible strike plates for both the 19mm and 38mm backsets. It eliminates the guesswork of which backset is specified and allows for easy retrofit. The surplus plate can be simply discarded. Plates are zinc plated mild steel.

—————————————————————————————————————————————————

Take a look at the full product details and catalogue, or phone +44 (0) 1785 282910 for assistance.