Custom Shape Vision Frames

Lo-Pro rectangular vision panels can also be manufactured in different shapes when something out of the ordinary is required. These include the LoPro-R racetrack pattern and LoPro-RD segmented half circle pattern. However there are many custom shapes available to special order (ref LoPro-CS) They use 44mm sheet metal screws that pass through the door cut-out and self-attach to the opposite side of the vision frame, thus eliminating the need to drill the door for through bolts and saving installation time and labour. This provides a neat concealed fixing on one side, free of fasteners for added security and a cleaner more aesthetic appearance.

MATERIAL

20 GA. Cold rolled steel as standard, also available Grade 304 stainless steel to order. Special security fasteners are available.

FINISH

Galvanised grey primed as standard, other finishes available.

DOOR THICKNESS

For 44-46mm thick metal or timber doors.

GLASS THICKNESS

6mm as standard. Glass pocket of 10mm allows for glazing tape to be used on one or both sides of the glass.

AESTHETICS

Tight mitred corners, bevelled glass stop and low profile, provide a clean tapered look.

 

LOPRO-R LOW PROFILE OVAL METAL VISION FRAME “RACETRACK” PATTERN

The LoPro-R is a combination of spun and roll formed section which gives the shape of a “racetrack”. It is available from stock in the three sizes. Other widths x heights available to special order. Minimum width 203mm (102mm radius). For smaller widths FGS-75R version must be used.

PRODUCT CODES : LOPRO-R 0830, LOPRO-R 0848, LOPRO-R 0860

 

LOPRO-RD LOW PROFILE HALF CIRCLE METAL VISION FRAME “SEGMENTED” PATTERN

Similar In design to the LoPro-R above, the LoPro-RD is a segmented circle. It is not quite a half-circle, but when used on pairs of entrance doors they give a stunning circular appearance. It is only available in the three sizes. Please advise left hand or right hand when ordering.

PRODUCT CODES : LOPRO-RD 24, LOPRO-RD 26, LOPRO-RD 30

 

LOPRO-CS LOW PROFILE CUSTOM SHAPES

Custom shapes can be made for churches, restaurants, schools and businesses. A selection is shown in our catalogue but please contact us if you require your own design to be manufactured. Custom shapes can also be manufactured as FGS-75-CS.

—————————————————————————————————————————————————

Take a look at the full product details and catalogue, or phone +44 (0) 1785 282910 for assistance.