LoPro-IS Metal Vision Frames

LOPRO LOW PROFILE METAL VISION PANEL – TO SUIT VARIOUS DOOR & GLASS THICKNESSES

The LoPro-IS is very similar to the LoPro but it uses different profiles to accommodate a range of door and glass thickness combinations. It is easy to install and provides a low profile, “flush to the door look”. Sheet metal screws pass through the door cutout, and fasten to the opposite side of the vision frame, thus eliminating the need to drill the door for through bolts and saving installation time and labour. It also leaves the corridor side of the frame free of fasteners for added security and a cleaner, more aesthetic appearance.

product-LOPRO MATERIAL

20GA. Cold Rolled Steel and grades 304 and 316 stainless steel.

FINISH

Galvanised Grey Primed as standard, other finishes available to special order.

AESTHETICS

Tight mitred corners, bevelled glass stop and low profile, provide a clean tapered look.

SIZES

Over fifty sizes in stock; any size to order.

Fire tested to 4 hours on steel doors and 1 hour on timber doors when used with Zero FS2002 intumescent glazing tape and FS4004 aperture liner (on timber doors) with suitable glass. FS9009 “ceramic type” tape also suitable for use on fire rated steel doors.

Special security fasteners available.

DOOR AND GLASS THICKNESS

Door thickness of 44mm, 50mm and 54mm are standard. The door thickness can vary based on the thickness of glass used, up to a maximum of 70mm, provided longer fixing screws are used. If larger glazing pockets are required, then the FGS-IS can be used as this will suit doors and panels up to 100mm thick.

PROFILES

There are five different profiles in the LoPro-IS range; profiles A, B, C, D and E. They can be used in combination to suit various door, glass and double glazed unit thicknesses. The simplest way to think about it is that if you add 10mm to the glazing pocket, you also add 10mm to the door thickness.

Please note that with some combinations the glass may be offset within the door thickness.

—————————————————————————————————————————————————

Take a look at the full product details and catalogue, or phone +44 (0) 1785 282910 for assistance.