These flush bolts are fitted top and bottom in the leading edge of the inactive leaf of a pair of metal doors. When both leaves are closed the flush bolts cannot be seen. With the inactive leaf bolted and secure, the active leaf can be locked and both leaves become secure. The flush bolts on this page are manufactured from brass with a satin chrome finish and are suitable for use on fire rated doors. They are manufactured to ANSI standards (American National Standards Institute) which means fixing positions do not vary and they can be fitted to pre-prepped metal doors. Z003R/BULLET electro yellow passivated bullet head available separately.
Brass, satin chrome US26D finish.
Faceplate 25.4mm wide x 171.4mm high.
STRIKE PLATE SIZE
23.8mm x 57.1mm.
25.4mm x 50.8mm.
305mm steel rod measured from centre of face to bolt end, retracted.
19mm bolt throw, 38mm adjustable bolt head.
Fits ANSI A115 door and frame preparation.
Flat face only for use on square edged doors.
Supplied with rod, guide bracket, strike plate and 8 x No 8 x ¾ FH combo screws.
Successfully tested to EN 12051: 1999. Classification 3 3 – 0 1 3 2. Copy of Exova Warringtonfire Report WIL 355513 dated 30.09.2015 available upon request.
Included in successful 4 hour fire test to BS 476: Part 22: 1987. Copy of WFRC Report No. C118425 available upon request.
Packed 2 bolts per box with rods and fittings. Outer cartons of 50.
|Dimensions||25.4 x 171.4 mm|
If you would like to know more about this product and perhaps order it, then please use the form below to enquire about it and one of our members of staff will contact you and help with any questions you may have.