No products in the cart.

ANSI Standard Manual Windstorm Flush Bolt with Stainless Steel Rod – Z018R

Description

Description

These flush bolts are fitted top and bottom in the leading edge of the inactive leaf of a pair of metal doors. When both leaves are closed the flush bolts cannot be seen. With the inactive leaf bolted and secure, the active leaf can be locked and both leaves become secure. The flush bolts on this page are manufactured from brass with a satin chrome finish and are suitable for use on fire rated doors. They are manufactured to ANSI standards (American National Standards Institute) which means fixing positions do not vary and they can be fitted to pre-prepped metal doors. Z003R/BULLET electro yellow passivated bullet head available separately.

MATERIAL
Brass body, satin chrome US26D finish and stainless steel windstorm rod.

BODY SIZE
Faceplate 25.4mm wide x 171.4mm high x 3.2mm deep.

STRIKE PLATE SIZE
23.8mm x 57.1mm.

GUIDE SIZE
25.4mm x 50.8mm.

ROD
305mm stainless steel rod measured from centre of face to bolt end – retracted. 12.7mm diameter. Rod threaded at bottom to engage in bolt body and shaped conventionally at top to suit top guide.

THROW
19mm bolt throw, 38mm adjustment on bolt head.

ANSI PREP
Meets ANSI A156.16, L04251.

UL
UL Certified.

HURRICANE TESTING
Assembly approved for use in the State of Florida, including the High Velocity Hurricane Zone (HVHZ).

FACE
Flat face only for use on square edged doors.

FIXINGS
Supplied with rod, guide bracket, strike plate and 8 x No 8-32 x ¼ flat head (FH) machine screws in stainless steel.

FIRE
US fire rating up to and including 3 hours.

BOX QUANTITY
Packed 2 bolts per box with rods and fittings. Outer cartons of 10.

Enquire

If you would like to know more about this product and perhaps order it, then please use the form below to enquire about it and one of our members of staff will contact you and help with any questions you may have.

Custom Tab For All Products
Back to top