Concealed pattern power transfer unit.
Flexible metal conduit.
Steel casing, chrome plated finish.
Body Width – 25mm
Body Height – 290mm
Outer Diameter – 14mm
Inner Diameter – 11mm
Material – Mild Steel
Finish – Chrome Plated
These products are widely used where cable management is required on hinged doors, typically where it is necessary to transfer electricity from door frames to door leaves to power access control and electromagnetic door closers. These power transfer units are concealed fixing and are invisible when the door is in the closed position. They are fitted at the hinge side of the door and allow the door to open to 120°. Both variants have a steel casing body and flexible metal conduit in chrome plated finish. Please note the square pattern is 16mm deep whereas the radius pattern is 20mm deep.
This product has been successfully tested to Grade 4 (240 hours neutral salt spray exposure) in accordance with BS EN 1670:2007 Building Hardware – Corrosion Resistance. Report No. WIL 392103 dated 30.01.2018 refers.
The ZCDL has been assessed by Exova Warringtonfire for use on previously fire tested insulated and uninsulated steel-based doorsets which have achieved up to 240 minutes integrity, and where appropriate insulation, in accordance with BS EN 1634-1:2014. Copy of WF Assessment Report No. 387313 Issue 3 dated 31.08.2017 available on request.