The Z105ST is a heavy pattern surface fixing friction door stay manufactured in stainless steel.
Barrelled finish stainless steel is used in aggressive conditions. Please note this is not an architectural stainless finish; barrelled finish looks very different to satin stainless steel. Although stainless steel stays are not the cheapest on the market they will not succumb to corrosion and will continue to operate effectively for years to come.
229mm centre to centre of arm. To adjust the friction, tighten or loosen the locknut on the friction box using a spanner.
65mm spacing from the hinge axis will give an opening angle of approximately 90°. Decrease this dimension for greater angles (e.g. 95-100°) or increase the dimension for restricting the door to approximately 80-85°.
Identical to Z105-Z mild steel pattern but manufactured from stainless steel.
If more or less friction is required, adjust the hexagonal bolt accordingly. It is important that the friction is checked and adjusted regularly. This device is designed to control the speed of opening and closing: It is not a door stop or holder. To prevent damage to the door or adjacent cladding, a supplementary door stop should be fitted, particularly if the building is in an exposed position.
Since it is a surface fixing product, this door stay is suitable for use on both timber and steel doors.
Finish – Barrelled Stainless Steel
Z105ST has been successfully tested to Grade 4 (240 hours neutral salt spray exposure) in accordance with BS EN 1670:2007 Building Hardware – Corrosion Resistance. Report No. WIL 392103 dated 30.01.2018 refers.
If you would like to know more about this product and perhaps order it, then please use the form below to enquire about it and one of our members of staff will contact you and help with any questions you may have.