ANSI Self-Latching Flush Bolt - Z017R

ANSI Self-latching Flush Bolt, Timber Doors, Satin Stainless Steel, US32D, Pair

The Z017R is UL Listed for 90 minutes for use on the inactive leaf of a pair of timber doors. They fit the standard ANSI preparation for timber doors. They are supplied as pairs consisting of a self-latching top bolt for the top of the door and a standard automatic flush bolt for the bottom of the door. The bolts are fully automatic and require no power or electricity. The mechanisms have dust covers to keep out sawdust and there are no rods as the bolts are an integral part of the mechanisms.

Both bolts are fitted in the first closing door (inactive leaf). At the top of the door the self-latching flush bolt has a bevel shaped bolt and will engage the curved lip strike in the head of the frame as the first closing door (inactive leaf) closes, locking it at the top. The bottom bolt, automatic flush bolt will engage the sill and frame strike only when the second closing leaf (active leaf) is closed. Therefore, when both door leaves are closed, both top and bottom bolts are engaged.

The bottom bolt will release when the active door is opened. The top bolt will remain locked until the bolt manually disengaged by operating the slider on the face of the bolt, and then it will be possible to open the inactive leaf. It would be recommended to specify a door selector when using automatic flush bolts, even for plain meeting stiles.

The body measures 25mm wide x 216mm long x 51mm deep, and the rod is 457mm overall. Fits standard ANSI prep for timber doors. Reversible, non-handed. It is not necessary to reverse either top or bolt. US32D satin stainless-steel finish. Supplied with installation instructions and packed as a set (top and bottom bolt).

Fire Tested to UL listed for 90 minutes fire rating on UL Listed timber and composite doors measuring up to 2438mm wide x 2438mm high.