CORNI COMPOSIT NEW is a complete modular range of surface mounted push-bar panic exit devices manufactured by ASSA ABLOY Italia S.p.A. The panic bolt patterns comprise a panic latch and a modular transformation kit (vertical or horizontal) which includes stainless steel Pullman latches, steel rods and aluminium rod covers as standard. The same transformation kits are used with the CORNI MILLENIUM PUSH & PULL range. Single panic bolts are supplied with three point locking as standard; top, bottom and central. These may be converted to two point locking top and bottom by the use of a blanking plate to nullify the central latch if required. CORNI COMPOSIT NEW is suitable for use on mid-rails of doors made of steel, timber, aluminium and PVCu.
COMPOSIT NEW has been sold in the UK and Ireland for many years. It features a modern design and can be used on new installations but the mechanisms which measure 205mm high x 36mm wide make it suitable for the retrofit market and replacing other makes of surface fixed panic bolt. All the products described and referenced on these two pages use the COMPOSIT NEW models that work with euro profile cylinders, but there are similar products available to special order that work with oval cylinders. Different latch kits offer the option for both Pullman latches to shoot vertically top and bottom or shoot horizontally (making three horizontal latches at the top, middle and bottom). A horizontal shooting bottom latch avoids the need to drill the threshold and eases installation. The range conforms to the European standard EN 1125: 2008 on panic exit devices, is CE marked, and is suitable for use on fire rated doors. The standard finish is black, with the exception of the cross bars which can be supplied red or plated steel to match satin stainless steel as an option.
There are three options for obtaining outside access. (a). Series NF9510 is a simple handle on a rectangular rose and supplied with a spindle which goes through the door and into the back of the mechanism. (b). Series NF9510 simple handle (as above) can also be used in conjunction with a euro profile half cylinder NF160 which can be supplied 76mm (NF160/F), 86mm (NF160/MF) or 106mm long (NF160/LF). (c). Series NF9521 is a handle on a backplate with a round brass cylinder with long tail that passes through the door and then engages in a euro profile shaped cam adaptor that fits into the back of the mechanism.
CE MARKING CE Marked. Classification 3-7-7-B-1-3-2-2-A-A.
STANDARDS Conforms to EN 1125: 2008 for doors on hinges or pivots weighing over 200kg, less than 2520mm high and 1320mm wide. Type A with push-bar operation. Projection of the device from the door surface less than 100mm (Class 2). Tested to 200,000 cycles. ICIM Product Certificate No. 001AD/6 dated 01.12.2014. Certificate of Conformity No. 0425-CPR-0587 dated 28.11.2014. Copies available on request. Refer to our website for DoP No. PED0006.
FIRE Suitable for use on fire and smoke door assemblies.
CONSTRUCTION Stainless steel latch bolts, steel mechanism, steel rods and aluminium rod covers. Mazak arms and round steel cross bar.
FINISH Mechanism standard finishes black and simulated stainless steel (IN) but different body colours may be available to special order depending on quantity, including grey (GR), white (WH) and gold (AU). Steel cross bar standard finishes black (N) and plated steel to match satin stainless steel (IN) but also available grey (GG), red (R), green (V), white (WH) and gold (AU) to special order depending on quantity.
HANDING Reversible, non-handed centre latch mechanism. Handed if supplied with micro-switch. Suitable for single leaf doors or pairs of doors, active or inactive leaf.
SIZES Standard vertical rods suit doors up to 2650mm with cross bar mounted at 900mm from FFL (and 2850mm if mounted at 1100mm) but the NF9821 extended rod increases this by 630mm to 3280mm and 3480mm respectively. The standard cross bar is 995mm long but is also available 1200mm and 1500mm. Cross bars should be cut as close to the opening width as possible but not less than 60% of the opening width. Please note doors above 2520mm high and 1320mm wide are outside the scope of the CE certification.
INSTALLATION Easy installation on very narrow profiles without any backplate. Full fitting details and fixings supplied. Recommended bar height 900-1100mm from FFL. Stainless steel latch strike plate included with two spacer shims. Nylon blanking plates included.
OAD Optional outside access devices available. Either NF9510 simple handle and NF160 euro profile cylinder or NF9521 handle on backplate. The key can be taken away leaving the OAD unlocked and allowing free access from outside. The outside access device cannot be locked and unlocked from inside the door.
MODULARITY Modular latch/rods transformation kits for one, two or three locking points. The same latch and rod kits operate with MILLENIUM PUSH & PULL but not with any other CORNI panic bolt ranges.
SIGNAGE Supplied with free issue "PUSH BAR TO OPEN" sign, 300x60mm, white on green self-adhesive.
MICRO-SWITCH Available with micro-switch to detect when device is operated or to work with a delayed egress system: advise right or left hand and whether micro-switch is to act on latch or lever handle or both.
CAD DRAWING Please contact us for details. DXF format CAD files available.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Recommended for you
Over 6,000 lines
Thousands of products to choose from
Secure Online Payments
Payments are secured by 256-bit SSL encryption
Fast Delivery
Usually next working day if ordered before 2:45 p.m.