Set of Upper and Lower Rods - NPAM11 00 05

The CORNI EUROSMART is a mortice panic exit device manufactured by ASSA ABLOY Italia S.p.A. suitable for single leaf and double leaf doors. It is specifically designed for use on steel fire-rated doors. On a single leaf door the reversible mortice panic lock case is fitted in the leading edge of the door and the panic exit device with crossbar is mounted on the inside face of the door. Three cover plates are supplied and used as required; 72mm or 92mm centres for euro cylinder, and blind cover plate for no cylinder. Vertical rods cannot be fitted on a single leaf.

On double leaf pairs of doors the primary leaf is fitted with EUROSMART hardware as above but a reversible panic counter-lock will also be required morticed into the edge of the secondary leaf. This has a receiving strike inserted in the forend that accommodates the latchbolt of the panic lock in the primary leaf. Concealed vertical rods are fitted to the counter-lock case in the secondary leaf to secure the secondary leaf top and bottom. Rods may be cut to size on site and both rods have a 60mm long x 10mm diameter tapered bullet tip. A re-latching device may be fitted at the top of the secondary leaf to receive the top rod. This should be ordered separately.

The PAM21 series of levers and knobs on backplate are an essential part of this system and must be ordered as they include the spindles to operate the panic exit device. The plate measures 165x46mm and is 8mm thick. They are supplied with necessary spindles, also a rod with plug to regulate the spindle. The outside access device does not render the panic device inoperable from the inside.

CE MARKING
CE Marked. Classification 3-7-7-B-1-3-2-2-A-A.

STANDARDS
Conforms to EN 1125: 2008 for doors on hinges or pivots weighing over 200kg, less than 2520mm high and less than 1320mm wide. Type A with push-bar operation. Projection of the device from the door surface is 100mm (Class 2). Tested to 200,000 cycles. ICIM Product Certificate No. 148AD/0 dated 07.05.2012. Certificate of Conformity No. 0425-CPD-1331 dated 29.06.2012. Copies available on request. Refer to our website for DoP No. PED0001.

FIRE
Suitable for use on fire and smoke door assemblies.

CONSTRUCTION
Steel mechanism and plastic coated steel arms. ABS thermoplastic covers as standard, but also available with real stainless steel covers (but with black arms). Oval section cross bars are manufactured from steel, aluminium or real stainless steel. EUROSMART uses the same cross bars as MINISTAR 429.

FINISH
Standard mechanism and arms finished black, but also available with silver grey plastic coated arms and matching ABS thermoplastic covers to complement stainless steel door hardware, finish ref Silver Grey Inox Match. There is also a version with real stainless steel mechanism covers with standard black arms. Cross bars available anodised silver, real stainless steel, painted black and painted red.

HANDING
Reversible, non-handed by inverting lock case.

SIZES
Cross bars 900mm, 1200mm and 1500mm. Cross bars should be cut as close to the opening width as possible but not less than 60% of the opening width. Vertical rods one size only; will suit doors up to 2600mm, but fire rated doors up to 2520mm high only.

LOCK CASE
Reversible split follower panic lock case suitable for fire rated doors. Steel case, forend and latchbolt. Reversible by inverting, latchbolt 12mm throw. 72mm centres, 65mm backset, 85mm case depth, 9mm split follower. One-piece 235x24mm radiused forend. Electric version also available ref. N4569065090. Narrow stile lock cases are also available to special order.

COUNTER-LOCK
Reversible panic counter-lock case suitable for fire rated doors, with receiving strike inserted in the forend. Steel case and forend. 65mm backset, 85mm case depth, 9mm one-piece follower. Forend 235x24mm.

RE-LATCHING DEVICE
Automatic re-latching device for top rod on secondary leaf available to order separately.

INSTALLATION
Lock and counter-lock require morticing in door edge(s). Full fitting details and fixings supplied. Recommended bar height 900-1100mm from FFL.

OAD
PAM21 series of outside access devices as below. These are an essential part of this system and must be ordered as they include the spindles to operate the panic exit device. Spindles are not available separately. Finish black. Euro profile cylinders available to order separately: cylinder length will be dictated by door thickness. Backplates are 8mm thick.

MODULARITY
Not compatible with MINISTAR 429, MINIPAD 423 or TOUCH 445. However it does use the same oval cross bars as MINISTAR 429.

SIGNAGE
Supplied with free issue "PUSH BAR TO OPEN" sign, 300x60mm, white on green self-adhesive.

DOGGING DEVICE
Not available with dogging device.

MICRO-SWITCH
Available with micro-switch to detect when device is operated or to work with a delayed egress system, suffix /MIC.